97
ViewingImages
6
96
For all information on FinePixViewer functions, refer to “How to Use FinePixViewer” in the Help
menu for details.
■Example: Looking up slide shows
1Click “How to Use FinePixViewer” in the FinePixViewer Help menu.
2Click “Basic Operation” and then click “Slide Show” in the menu that appears.
3The “Slide Show” information appears. Press the “<<<” key to view the previous page or the
“>>>” key to view the next page.
6.4.1 Mastering FinePixViewer
Only perform this operation when you no longer require the installed software or when the software
was not installed correctly.
6.4.2 Uninstalling the software
hWhat is explained in “How to Use FinePixViewer”...
“How to Use FinePixViewer” covers a range of topics, including batch processing and ordering prints.
1Check that the camera is not connected to the PC.
2Quit all currently running applications.
3Open the “My Computer” window. Then open the “Control Panel”
and double-click on “Add/Remove Programs”.
Windows
4The “Add/Remove Programs Properties” window appears. Select
the software to be uninstalled (FinePixViewer or the driver) and
then click the [Add/Remove] button.
<To remove the driver software>
<To remove FinePixViewer>
CAMERA CONNECTION
When the “It is now safe to disconnect the camera”
message appears, click the [OK] button and
disconnect the camera.
Press the “POWER” button to turn the camera off.
2
6.3.2 Disconnecting the camera
1Windows
Once the image has been saved, the window below appears (Save Image Wizard Windows).
To disconnect the camera, click the [Remove] button.
Macintosh
Once the image has been saved, the window below appears. To disconnect the camera, click
the [OK] button.
Macintosh
5When the message appears, click the [OK] button.
Check your selection carefully since the process
cannot be canceled once you click the [OK] button.
6Automatic uninstallation begins.
When uninstallation ends, click the [OK] button.
■Uninstalling FinePixViewer
Quit FinePixViewer. Then drag the installed FinePixViewer folder to the Trash and select “Empty
Trash” in the “Finder” menu.
6.4 USING FinePixViewer