27
Usingthe Camera
2
26
MOVE TO PHOTOGRAPHY MODE OR PLAYBACK MODE
Press the “w” button for about 1 second to
turn the camera on in Playback mode.
Press the “w” button during shooting to
change to Playback mode.
Press the “w” button again to return to
Photography mode.
TAKING PICTURES (AUTO MODE)
PHOTOGRAPHY MODE
SHOOTING ASSISTANT FUNCTION
Select the framing guideline and post shot assist
window in Photography mode.
Pressing the “DISP/BACK” button changes the
LCD monitor display.
Text displayed
Framing guideline displayed
No text displayed
Post shot assist window
displayed
◆Important ◆
Always use AF/AE lock when composing a shot.
The image may be out of focus if AF/AE lock is not
used.
The framing guideline display consists of horizontal
and vertical lines that divide the image on the LCD
monitor into 9 frames.
When using the post shot assist window, the last
photographed image appears as a thumbnail in the
bottom left corner of the LCD monitor (post shot
assist window). Up to the last 3 photographed
images appear on the post shot assist window.
This serves as a guide for taking other shots with
similar compositions.
●
!
Any of the following clears the image in the post shot assist
window:
iSetting the camera to Playback mode
iTurning the camera off
iUsing the PictBridge function
iUsing the DSC mode etc.
NNN
12121212
Scene
NNN
12121212
Position the main subject at the intersection of
two lines in this frame or align one of the
horizontal lines with the horizon. Use this frame
as a guide to the subject’s size and the balance
of the shot while composing a shot.
●
!
The framing guideline is not recorded on the image.
●
!
The lines in the scene frame divide the image into 3
roughly equal parts horizontally and vertically. The resulting
printed image may be shifted slightly from the scene frame.
Best framing
Post shot assist window
VIEWING THE IMAGES (wPLAYBACK)
PLAYBACK MODE
Shooting ba Playback
Power-ON
◆Auto power off function ◆
When the Auto power off function is active, if the camera is left unused for 2 or 5 minutes, this function
turns the camera off (➡P.81). To turn the camera back on, close the lens cover and then hold down the
“w” button for about 1 second.
Single-frame playback
Press “c” to scan forward through the images.
Press “d” to scan backwards.
●
!
When the camera is set to Playback mode, the last image
shot appears on the LCD monitor.
Selecting images
To select images on the thumbnail lists screen,
hold down “d” or “c” for about 1 second during
playback.
◆Still images viewable on FinePix Z2 ◆
This camera will display still images recorded on FinePix Z2 or still images (excluding some
uncompressed images) recorded on any FUJIFILM digital camera that supports xD-Picture Cards.
Clear playback or playback zooming may not be possible for still images shot on cameras other than
FinePix Z2.