FujiFilm FinePix Z2 - page 53

105
Warning Displayed Explanation Remedy
Warning Displays eThe table below lists the warnings that are displayed on the LCD monitor.
(Lit red)
(Blinking red)
The battery is low or completely out of
charge.
Load a new or fully charged battery.
There is a strong likelihood of camera
shake because the shutter speed is slow.
Use flash photography. However, place the camera
on a stable surface for some scenes and modes.
|
The AF (autofocus) cannot work effectively. iIf the image is too dark, take the picture at a
distance of around 2 m (6.6 ft.) from the subject.
iUse AF lock to take the picture.
Outside the AE continuous range. The picture can be taken, but the correct
brightness (exposure) will not be obtained.
Camera malfunction or fault.
NO CARD
CARD NOT INITIALIZED
CARD ERROR
CARD FULL
BUSY
WRITE ERROR
FRAME NO. FULL
READ ERROR
FOCUS ERROR
ZOOM ERROR
iTurn the camera on again, taking care not to
touch the lens.
iTurn the camera off and on again. If the message
still appears, contact your FUJIFILM dealer.
No xD-Picture Cardis inserted. Insert an xD-Picture Card.
iThe xD-Picture Cardis not formatted.
iThe xD-Picture Card contact area is
soiled.
iCamera fault.
iFormat the xD-Picture Cardon the camera.
iWipe the contact area on the xD-Picture Card
with a soft dry cloth. It may be necessary to
format the xD-Picture Card. If the message still
appears, replace the xD-Picture Card.
iContact your FUJIFILM dealer.
iThe xD-Picture Card contact area is
soiled.
iThe xD-Picture Cardformat is incorrect.
iCamera fault.
iThe xD-Picture Cardis damaged.
iWipe the contact area on the xD-Picture Card
with a soft dry cloth. It may be necessary to
format the xD-Picture Card. If the message still
appears, replace the xD-Picture Card.
iContact your FUJIFILM dealer.
The xD-Picture Cardis full. Erase some images or use an xD-Picture Card
that has ample free space.
iThe data could not be recorded due to
an xD-Picture Card error or a
connection error between the xD-
Picture Cardand camera.
iThe image cannot be recorded as it is
too large to fit in the available space on
the xD-Picture Card.
iRe-insert the xD-Picture Card or turn the
camera off and then on again. If the message
still appears, contact your FUJIFILM dealer.
iUse a new xD-Picture Card.
The timing for recording was incorrect
because the xD-Picture Card was
formatted on a PC.
Use an xD-Picture Card that was formatted on
the camera.
The frame number has reached 999-9999. 1Insert a formatted xD-Picture Cardinto the
camera.
2Set “RENEW” as the FRAME NO. setting in
the “˜” SET-UP menu.
3Start taking pictures (The frame number starts
from “100-0001”).
4Set “CONT.” as the FRAME NO. setting in the
“˜” SET-UP menu.
iThe played back file was not recorded
correctly.
iThe xD-Picture Card contact area is
soiled.
iCamera fault.
iAn attempt was made to play back the
movie or the image that was not
recorded on this camera.
iThese images cannot be played back.
iWipe the contact area on the xD-Picture Card
with a soft dry cloth. It may be necessary to
format the xD-Picture Card. If the message still
appears, replace the xD-Picture Card.
iContact your FUJIFILM dealer.
iThe movie and image cannot be played back.
104
Notes on the xD-Picture Card™
■Image Memory Card
hThis Image Memory Card is a new image
recording media (xD-Picture Card) developed for
digital cameras. The Image Memory Card consists
of a semiconductor memory (NAND-type flash
memory) to record digital image data.
The recording process is electrically performed
and enables erasure of existing image data as well
as re-recording of new image data.
hWhen using a new Memory Card, or a Memory
Card that has been formatted by a PC, be sure to
format the card with your digital camera before
using it.
■Protecting Your Data
hImages and movies may be lost or destroyed in the
following situations. Please note that FUJIFILM
assumes no responsibility for data that is lost or
destroyed.
1. Removal of the memory card or turning the power
off while the memory card is being accessed (i.e.,
during record, erase, initialization, and playback
operations).
2. Improper handling and use of the memory card by
the user or third party.
hSave your important data to another media (i.e., MO
disk, CD-R, hard disk, etc.).
■Handling xD-Picture Card
hWhen storing xD-Picture Cards, make sure that
they are kept out of the reach of children. An xD-
Picture Cardcould be swallowed cause suffocation.
If a child swallows an xD-Picture Card, seek
medical attention or call emergency number right
away.
hWhen inserting the xD-Picture Card into the
camera, hold the xD-Picture Card straight as you
push it in.
hDo not expose an xD-Picture Cardto shock. Do not
apply pressure, and avoid bending.
hDo not use or store xD-Picture Card in hot and
humid places.
hClean the xD-Picture Card with a soft dry piece of
cloth when dirty.
hWhen carrying or storing an xD-Picture Card, keep
it in the special protective case.
hThe xD-Picture Cardwill work well for long time, but
will sooner or later lose its ability to store and play
back images or movies. If this happens replace it
with a new xD-Picture Card.
hNever remove the xD-Picture Card or turn the
camera off during data recording or erasing (xD-
Picture Card formatting) as this could be damaged
to the xD-Picture Card.
hThe use of xD-Picture Cards is recommended with
FinePix Z2.
The recording quality cannot be guaranteed when
xD-Picture Cards other than those manufactured by
FUJIFILM are used.
hThe xD-Picture Card may feel warm when it is
removed from the camera after taking pictures. This
is normal.
hDo not put labels on the xD-Picture Card. Peeling
labels can cause the camera not to work properly.
■Using xD-Picture Card with a PC
hWhen taking pictures using an xD-Picture Cardthat
has been used on a PC, reformat the xD-Picture
Cardusing your camera for best quality.
hWhen formatting an xD-Picture Card, a directory
(folder) is created. Image data is then recorded in
this directory.
hDo not change or delete the directory (folder) or file
names on the xD-Picture Card because this will
make it impossible to use the xD-Picture Card in
your camera.
hAlways use the camera to erase image data on an
xD-Picture Card.
hTo edit image data, copy the image data to the PC
and edit the copy.
■Specifications
Type Image memory card for digital
cameras (xD-Picture Card)
Memory type NAND-type flash memory
Conditions for use Temperature:
0°C to +40°C
(+32°F to +104°F)
Humidity:
80% max. (no condensation)
Dimensions 25 mm ×20 mm ×2.2 mm
(0.98 in. ×0.79 in. ×0.09 in.)
(W ×H ×D)