Connecting to a PC

MEMO

•Only images saved with FinePix Viewer can be viewed. We recommend always saving your images on a PC.

•If you cancel saving by clicking the [Cancel] button, make sure to press wto turn off the camera before disconnecting it from the PC.

Windows XP

AThe “Found New Hardware” help message appears in the bottom-right corner of your screen. This message will close when the settings are completed. No action is required.

CAUTION

This step is not required for subsequent connections.

BFinePixViewer automatically starts up and the Save Image Wizard window (Save Image dialog box) appears. Follow the instructions provided on screen to save the images. To proceed without saving the images, click the [Cancel] button.

MEMO

•Only images saved with FinePix Viewer can be viewed. We recommend always saving your images on a PC.

•If you cancel saving by clicking the [Cancel] button, make sure to press wto turn off the camera before disconnecting it from the PC.

Proceed to “Using FinePixViewer” (➝p.119).

Disconnecting the camera

1 Windows

Once the image has been saved, the window below appears (Save Image Wizard window). To disconnect the camera, click the [Remove] button.

Macintosh

Once the image has been saved, the window below appears. To disconnect the camera, click the [OK] button.

2 APress wto turn the camera off.

BDisconnect the USB cable from the camera.

118