Setting the Shooting Mode

You can select the most suitable setting according to the subject by selecting one of the Shooting modes.

Setting Picture stabilization

(Anti-blur) and Natural & d

 

Previous shooting mode

Press the “ ” (

) button to set

Picture stabilization

(Anti-blur) or

Natural & d.

 

The setting switches with each press of the button.

You can select

Picture stabilization (Anti-blur) and

Natural & dfrom the Shooting modes on the shooting

menu (➝p.43)

 

When Picture stabilization (Anti-blur) or

Natural &

d is selected on the shooting menu, pressing the “” ( ) button switches between these two modes.

Picture stabilization (Anti-blur)

This mode can reduce both camera blur and subject blur by increasing the shutter speed.

NATURAL & d

This mode shoots 2 images continuously without flash and with flash. Shooting with flash allows you to take a picture of a main subject brightly. Shooting without flash produces beautiful images that retain the natural ambience. This mode is useful for shooting 2 different types of pictures at the same time.

When pressing the shutter button, first picture is taken without flash and next picture is taken with flash. Always 2 pictures are taken per 1 shot.

Do not move the camera until the shooting ended.

MEMO

This mode helps to avoid failed shots that may occur when using other Shooting modes when taking a picture against the sun, etc.

CHECK

Flash fires automatically. Do not use this mode at situations where the flash cannot be used.

CAUTION

•When there is insufficient space on the xD-Picture Card or internal memory for 2 shots, this mode cannot be set.

•Continuous shooting is disabled when setting .

42