IR COMMUNICATION
CONNECTING
CANCEL
DPress MENU/OK to begin transmission. When transmission is completed, “DATA RECEIVED” will appear on the LCD monitor.
CHECK
You can receive image data by simply pressing buttons
as the order below. p➝ p➝ MENU/OK
CAUTION
•Movie images cannot be transmitted.
•Image data may be compressed when transmitted.
•If “COMMUNICATION ERROR”, “CANNOT BE
TRANSMITTED”, or “CANNOT BE RECEIVED” appears, press por MENU/OK to retransmit the image data, or press DISP/BACK to cancel transmitting.
•Do not place anything between the transmitting and receiving device.
•Leaving the camera in direct sunlight or directly under fluorescent lighting may prevent successful data transfer.
•Successful transfer may not be possible when transmitting near infrared transmission devices (such as the remote controller of TV or VCR) or devices that generate electrical noise.
•Correctly aim the infrared port towards the front of the device or camera’s infrared port during image data transmission.
MEMO
When playing back an image received from another camera, 
(present icon) will appear in the LCD monitor.
68