Appendix2 DAILY CARE

When operating the scanner, the ￿￿￿￿￿￿￿ ADF’s inside glass becomes very

hot.

Before you clean inside the scan- ner, turn off its power and unplug the AC adapter from the outlet. Wait for at least 15 minutes.

■Locations and Cycle for Cleaning

 

 

Part to clean

 

 

Standard Cleaning Cycle

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pad ASSY

 

 

Clean these parts after every

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1,000 scans.

Pick roller unit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pinch roller

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Glass

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

■Cleaning Materials

Cleaning

Parts No.

Remarks

Materials

 

 

 

 

 

 

 

 

Cleaner F1

CA99501-

1 bottle

(or isopropyl

0013

Moisten a cloth with

alcohol)

 

this fluid and wipe the

 

 

scanner clean.

 

 

 

Lint-free dry

- Commercially available one

cloth

 

 

ATTENTION

The scanner must be cleaned more frequently if you scan any of the following type of sheets:

•Documents of coated paper

•Documents that are almost completely covered with printed text or graphics

•Chemically treated documents such as carbonless paper

•Documents containing a large amount of calcium carbonate

•Documents written by pencil

•Documents with not enough fixed a toner.

For details about the cleaning materials, contact the FUJITSU scanner dealer where you purchased the scan- ner.

■Cleaning Method
The ADF must be cleaned with a lint-free cloth moistened with the Cleaner F1.

For details on the cleaning the ADF, refer to "3.2 cleaning the ADF" in fi-5015C Operator’s Guide on the Setup CD-ROM".

AP-4