7.1 Online setup

"Software Operation Panel" is an application program that is installed with driver software (TWAIN/ISIS). This software allows you to configure various settings for fi-5750C with user-friendly interfaces. To start this application, select [All Programs] - [Scanner Utility for Microsoft Windows] from [Start] menu then click [FUJITSU Software Operation Panel]. Details of settings are as follows:

No

Function

Description

 

Settings

Default

 

 

Specifies double feed detection

 

None / Check Overlapping / Check

 

 

 

method. The scanner monitors

 

 

 

Double feed

 

Length / Check overlapping and length

 

1

differences in document length,

 

None

 

For setting the length difference

 

 

overlapping or both, for detecting

 

 

 

 

 

detection, select 15 / 10 / 20mm

 

 

 

double-feeds.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page Edge Filler(ADF)

Specifies area to be erased from

 

Top/Bottom/Right/Left: set the value from

Top/Bottom/Right/Left:

2

image margins when scanning

 

 

0 to 15mm (can be changed by 1mm)

0mm

 

 

documents with the ADF.

 

 

 

 

 

 

 

 

 

 

 

 

 

Page Edge Filler(FB)

Specifies area to be erased from

 

Top/Bottom/Right/Left: set the value from

Top/Bottom/Right/Left:

3

image margins when scanning

 

 

0 to 15mm (can be changed by 1mm)

0mm

 

 

documents with the Flatbed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 2

 

All Rights Reserved, Copyright (C) PFU LIMITED 2003