Chapter 9 OPTIONS (Continued from the previous page)

9.1 Additional memory board

When this option is installed on the scanner, it improves scanning performance at higher resolution setting. (For example, scanning operation will not be interrupted at both sides colored 401dpi or higher resolution .)

1. Remove the screws on the rear side of the scanner, and remove the covers.

2. Insert the memory board into the slot and push it down so that the board is fixed with claws.

3. Secure the screws to fix the covers.

The following memory boards are recommendable for using with fi-5750C Color Image Scanner.

 

Manufacturer

 

Model

 

Memory Size

 

 

Micron Technology

 

MT4LSDT1664HG-13E

 

128MB

Micron Technology MT8LSDT3264HG-13E 256MB

HINT

If you confirm the additional memory board is completely insatalled, you check the scanner memory value of [standard information] on [Device information] panel in [Software operation panel].

All Rights Reserved, Copyright (C) PFU LIMITED 2003