Fujitsu fi-5750C 51

•

CONTENTS

Introduction

1 NAMES AND FUNCTIONS OF PARTS

2 BASIC SCANNER OPERATION

2.1 Turning the scanner ON/OFF

2.2 Setting the ADF

2.3 Loading documents onto the ADF

2.4 Scanning document using the Flatbed

2.5 Scanning documents

2.6 How to use the Scanner Driver

3 SCANNING VARIOUS TYPES OF DOCUMENTS

4 DAILY CARE

5 REPLACING CONSUMABLES

6TROUBLESHOOTING

7ONLINE SETUP

8DOCUMENT SPECIFICATION OF ADF

9OPTIONS

10SCANNER SPECIFICATIONS Appendix

2.6 How to use the Scanner Driver (Continued from the previous page)

2.6.2 FUJITSU ISIS Scanner Driver

FUJITSU ISIS Scanner Driver is designed for scanning documents with FUJITSU image scanner fi series by using application software that complies with The ISIS standard. The following describes the procedure with examples of QuickScan for ordinary scanning by using this driver software.

The procedure may vary depending on your application. If you use an application other than QuickScan, please refer to its Guide or Help for further information.

1.Procedure for Basic Scanning Operation

1.Start up the application.

From the [Start] menu, select [Programs]-[QuickScan] and click [QuickScan].

2.Select your scanner on the window below. Select [Scan] - [Select Scanner] on the menu bar.

1···10 11 12 13 14 15 16 17 18 19 20 21···29