3.2 Scanning documents with different widths

When you scan a batch of documents with different widths by using the ADF, you may get skewed images from smaller sized documents. Be sure to scan only documents of the same width together. To prevent skewed images, enable [Automatic Size and Skew Detection] function. For details on this function, refer to "3.8 Correcting skewed documents".

1.Adjust the side guides to the width of the largest document.

2.Align the edges of the documents.

3.As shown in the figure below, smaller documents are not fed into the ADF if they do not to contact the roller. Make sure to load the document so that all of sheets contact the roller.

For details on how to load documents, refer to "2.3 Loading documents onto the ADF".

CAUTION

When loading small documents onto the ADF paper chute, be careful not to touch the Chute roller cover for it may open while scanning operation and your fingers may get caught.

All Rights Reserved, Copyright (C) PFU LIMITED 2003