Contents
Page
Page
USING IP-9610SAFELY
Handling of This Manual
IMPORTANT NOTE TO USERS
All Rights Reserved. Copyright © FUJITSU LIMITED
PREFACE
ORGANIZATION AND CONTENTS OF THIS MANUAL
WARNING INDICATIONS
Warning indications within text
SAFETY PRECAUTIONS
List of important warnings
Normal use Possibility of electric shock and fire
Possibility of electric shock and fire
Possibility of electric shock
Possibility of electric shock, fire, and damage to the device
Possibility of serious injury and damage to the device
Possibility of fire, serious injury and damage to the device
LABEL
PRODUCT HANDLING PRECAUTIONS
Maintenance
Connectable devices
Disposal
Modification and restoration
CONTENTS
Help Information
5.3.2 Change of maintenance parts (Maintenance only)
A.1
A.2
A.2.1
CHAPTER
PREPARATIONS
Page
1.1.1 Main Features
Hardware option
Maximum
Description
installation
*1 The codec board has an 8 channel audio function
1.21.2 Components
1.31.3 Basic Application Examples
1.41.4 Part Names
explanation. For more information, see Software guide
DVB-ASIinput terminal. 75Ω unbalanced
DVB-ASIinput
See Section 2.4, “Connection to DVB-ASIDevice”, for an explanation on
(DVB-ASIIN)
using this terminal
Page
INSTALLATION AND
CONNECTION
Page
2.12.1 Installation Conditions
2.1.1 Environment conditions
2.1.2 Installation environment
1. 19” rack mounting
Page
2. Desk-topinstallation
Mark for rubber feet
2.1.3 Air flow into and out from the device
2.1.4 Open space required around the device
2.2 Power Supply System
Connections
2.2.1 Connection to ground
2.2.2 Connection to power source
AC cable clamp
USABLE DETACHABLE POWER SUPPLY CABLE SET
ASA
Possibility of electric shock, fire, and damage to the device
Possibility of damage to the device
100-240VAC
2.32.3 Connection to External Sync(REF)
2.42.4 Connection to DVB-ASIDevice
2.4.1 Connection to DVB-ASIInput Device
2.4.2 Connection to DVB-ASIOutput Device
2.5Connection to RS-232C/RS-422
2.5Device
2.62.6 Connection to Network
HUB, Router, etc
2.7Connection to Voice
2.7Communication (Intercom)
2.82.8 Optional Board Slot
OPERATION INSTRUCTIONS
Page
3.13.1 Power ON/OFF
3.1.1 Powering on
3.1.2 Powering off
3.23.2 Device Settings and Operation
3.3 Device Settings and Operation
(Front Panel)
3.43.4 Special Use of Cancel Key
CABLE SPECIFICATIONS
Page
4.14.1 Installation Preparations
4.24.2 Cable and Connector Details
(3)RS-232C / RS-422cable
(3)
RS-232C
RS-232CDTE
RS-232CDCE
(4) LAN cable
(8) Intercom adapter cable
Front view
・Audio adapter cable Type 1 TA75959-XXXXType 2 TA75960-XXXX
(9) 100 - 240 VAC power cord
Page
Page
TROUBLESHOOTING
Page
5.15.1 Help Information
Table 5.1 Problem descriptions and recommended actions
Page
5.25.2 Alarm LED Lamp Is On
Table 5.2 LED display details
5.35.3 Maintenance
5.3.1 Maintenance space
Flont space
for maintenance > 700×1000 mm
Rear space
5.3.2 Change of maintenance parts (Maintenance only)
Page
Appendix
Page
A.A1.1 Appearance
500±4 mm
43±1.5 mm
425±4 mm
Page
A.A2.2 Basic Specifications
A.2.1 External specifications
A.2.2 Environment specifications
A.2.3 Function specifications
Page
Parallel 2 pin with ground
G: Green, O: Orange, R: Red
A.A3.3 Preparations for Installation Work
A.3.1 Scope of installation work
A.3.2 Unpacking and device check
A.3.3 Installation conditions
A.3.4 Connecting external cables
A.4 Preparations for On-site
Turn-up
(1)Preparations
(1)
(2)Environment check
(2)
(3)Visual check of appearance
(6)Power on
(6)
(7)Unit test
(7)
Since this device executes a
Page
Glossary
and Index
Page
Glossary
IP (Internet Protocol)
IP Address
IP Multicast
LAN (Local Area Network)
LED (Light-EmittingDiode)
TS (Transport Stream)
TTL (Time To Live)
UDP (User Datagram Protocol)
Unicast
UTP Cable
Index
Operation
Optional board
57
Preparation for
clock
CE Conformity Information
