ETERNUS DX Disk storage systems User’s Guide -Server Connection- (iSCSI) for VMware® ESX
20
Copyright 2012 FUJITSU LIMITED P3AM-3412-11ENZ0
Chapter 6 Setting Up the VMware ESX Server
This chapter describes settings related to the server iSCSI interface.

6.1 Setting Up for VMware vSphere

Set up the VMware ESX server using the vSphere Client. The procedures described here are
based on the following multipath configuration.
Example connection configuration

6.1.1 Turning on the Devices

To turn on the connected devices, use the following procedures:
Procedure
1Turn on the LAN switch power.
2Check that the LAN switch's Ready (or equivalent) LED is lit.
3Turn on the ETERNUS DX Disk storage systems.
4Check that the ETERNUS DX Disk storage systems' Ready LED is lit.
IP address
for iSCSI port (3)
IP address
for iSCSI port (4)
VMware ESX server
VMkernel (iSCSI Software Initiator)
IP address (1)
VMkernel (iSCSI Software Initiator)
IP address (2)
LAN card LAN card
LAN switch LAN switch
ETERNUS DX Disk storage system