Component Name

Function

 

 

 

Operator

Copy density

Adjusts copy density (dark/light) in five stages.

panel

dial

 

 

 

 

 

Function No.

Displays the Function No. or also displays the scanner

 

display panel

read mode as follows;

 

 

On: Single-side reading mode

 

 

Blink: Double-sided reading mode

 

 

Mark: An application is being activated

 

 

When the AC adapter is connected to the scanner or the

 

 

PC’s power is turned on, the initialization of scanner is

 

 

executed. The display on the panel changes as follows;

 

 

P → 0 → 1 (When 1 appears, scanner becomes ready)

 

 

 

 

Function button

Selects a function to be started using this button.

 

 

This button’s function is set using Launch.

 

 

 

 

Duplex button

Switches between read modes. You can confirm the

 

 

current read mode with the Function No. display panel.

 

 

 

 

Send to button

Copies documents loaded in the document support.

 

 

Starts the operation specified by the Function button.

 

 

 

 

Scan button

Scans the document placed in position.

 

 

 

 

Power lamp

Stays lit while power is being supplied.

 

 

 

Stacker

 

Stacks the scanned documents.

 

 

 

 

Note:

 

Pressing the Send to or Scan button initiates the application software. The mark is displayed until the application software is ready. If the application software fails to get ready and the function No. display is restored, the Send to or Scan processing is canceled.

1-4

M3091DC Image Scanner Operation Guide