2.3 Connection
This section explains how to connect the power cable and SCSI cable , and also how to install the driver and other software.
2.3.1 Notes concerning Connection
When connecting cables, adhere to the following notes:
Fire or electric shock
−Do not use AC adapter other than in the package. Failure to do so could result in a fire or cause the scanner to fall.
−Before connecting or disconnecting a device, turn off the power switch on the personal computer, disconnect the power plug from the outlet, then follow the written procedure.
−Use the scanner only with the indicated supply voltage. Do not make a starburst connection.
−Do not hold the power cable or AC adapter with moistened hands when connecting or disconnecting it.
−If the power plug is dusty, clean it with a dry cloth.
−Do not put anything heavy on the power cable, and do not damage it by pulling, forcibly bending, twisting, or heating. Do not alter the power cable in any way.
−Do not use a power cable if it is damaged or the plug does not fit snugly into the outlet.
M3091DC Image Scanner Operation Guide |