applynetwork(8)

■Unless all of the host name, DNS domain name, IP address, net mask, and routing settings have been made, it results in errors. Please execute the sethostname(8), setnetwork(8), and setroute(8) command to set all items, then reexecute the applynetwork(8) command.

■To set to multiple interfaces, all of the host name, DNS domain name, IP address, net mask, and routing settings need to be set on every interface. In these interfaces, if any of these setting items omitted, it results in errors.

■To specify a host name, use the sethostname(8) command. To specify an IP address and net mask, use the setnetwork(8) command. To specify routing, use the setroute(8) command.

EXAMPLES EXAMPLE 1 Reflects the information that has been set for the XSCF network.

On a midrange server:

XSCF> applynetwork

The following network settings will be applied: xscf#0 hostname :hostname-0

DNS domain name :example.com

nameserver :10.23.4.3

interface

:xscf#0-lan#0

status

:up

IP address

:10.24.144.214

netmask

:255.255.255.0

route

:-n 0.0.0.0 -m 0.0.0.0 -g 10.24.144.1

interface

:xscf#0-lan#1

status

:down

IP address

:

netmask

:

route

:

Continue? [yn] :y

18

XSCF Reference Manual • Last Revised June 2007