deleteboard(8)

 

■ If "-c disconnect" is specified when either the domain power has been turned

 

 

 

off or the XSB is already disconnected from the domain configuration, no

 

 

operation is performed. If domain power-on or power-off is in progress, the

 

 

command results in an error.

 

■ If "-c unassign" is specified when either the domain power has been turned

 

 

off or the XSB is already disconnected from the domain configuration, the XSB is

 

 

switched from the assigned state to a system board pool. If the XSB is already in

 

 

a system board pool, no operation is performed.

 

■ If "-c reserve" is specified when either the domain power has been turned off

 

 

or the XSB is already disconnected from the domain configuration, the XSB is

 

 

immediately switched from the assigned state to a system board pool. If the XSB

 

 

is already in a system board pool, no operation is performed. If domain power-

 

 

on or power-off is in progress, the command results in an error.

 

■ When the XSB is disconnected, the hardware resource on the XSB is disconnected

 

 

from the operating system. For this reason, command execution may take time.

 

■ The state in which an XSB has been assigned means that configuring the XSB in

 

 

the specified domain has been reserved. The reserved XSB is configured when

 

 

the domain is rebooted or the addboard(8) command is executed. An already

 

 

assigned XSB cannot be specified for configuring or assignment from other

 

 

domains.

 

■ An XSB in the system board pool means that the XSB belongs to no domain and

 

 

is therefore available for configuring or assignment.

EXAMPLES

EXAMPLE 1 Puts the system board XSB#00-0, #01-0, #02-0, and #03-0 in the system

 

 

board pool

 

XSCF> deleteboard -c unassign 00-0 01-0 02-0 03-0

 

EXAMPLE 2 Reserves disconnection of XSB#00-0, #01-0, #02-0, and #03-0 .

 

XSCF> deleteboard -c reserve 00-0 01-0 02-0 03-0

EXIT STATUS

The following exit values are returned:

 

0

Successful completion.

 

>0

An error occurred.

SEE ALSO

addboard(8), moveboard(8), replacefru(8), setdcl(8), setupfru(8),

 

showboards(8), showdcl(8), showdevices(8), showdomainstatus(8),

 

showfru(8)

 

 

 

System Administration

33