fmadm(8)

NAME fmadm - fault management configuration tool

SYNOPSIS fmadm [-q] config

fmadm -h

DESCRIPTION fmadm (8) can be used to view system configuration parameters related to fault management.

fmadm can be used to:

View the set of diagnosis engines and agents that are currently participating in fault management

View the list of system components that have been diagnosed as faulty

The Fault Manager attempts to automate as many activities as possible, so use of fmadm is typically not required. When the Fault Manager needs help from a human administrator or service representative, it produces a message indicating its needs. It also refers you to a URL containing the relevant knowledge article. The web site might ask you to use fmadm or one of the other fault management utilities to gather more information or perform additional tasks. The documentation for fmdump(8) describes more about tools to observe fault management activities.

Privileges You must have platop, platadm, or fieldeng privileges to run this command.

Refer to setprivileges(8) for more information.

OPTIONS The following options are supported.

-h

Displays usage statement.

 

When used with other options or operands, an error occurs.

-q

Sets quiet mode. fmadm does not produce messages indicating the

 

result of successful operations to standard output.

OPERANDS The following operands are supported:

config

Displays the configuration of the Fault Manager itself, including

 

the module name, version, and description of each component

 

module. Fault Manager modules provide services such as

 

automated diagnosis, self-healing, and messaging for hardware

 

and software present on the system.

System Administration

51