Intro(8)

setlocale

set the default locale of the XSCF

setlocator

control the blinking of the CHECK LED on the operator

 

panel

setlookup

enable or disable the use of the Lightweight Directory

 

Access Protocol (LDAP) server for authentication and

 

privilege lookup

setnameserver

set the domain name system (DNS) servers used in the

 

XSCF network

setnetwork

configure a network interface using by XSCF

setntp

set the NTP servers used in the XSCF network

setpasswordpolicy

manage the system password policy

setpowerupdelay

set the warm-up time of the system and wait time before

 

system startup

setprivileges

assign user privileges

setroute

set routing information for an XSCF network interface

setshutdowndelay

set the shutdown wait time at power interruption of the

 

uninterruptible power supply (UPS)

setsmtp

set up the SMTP settings

setsnmp

manage the SNMP agent

setsnmpusm

specify the SNMPv3 agent’s User-based Security Model

 

(USM) configuration

setsnmpvacm

modify the SNMPv3 agent’s View-based Access Control

 

Model (VACM) configuration

setssh

set the SSH service used in the XSCF network. Also,

 

generate the host public key, and register or delete the user

 

public key, which are necessary for the SSH service

settelnet

start or stop the telnet service used in the XSCF network

settimezone

set the time zone and Daylight Saving Time of XSCF

setupfru

set up device hardware

showaltitude

display the altitude state of the system

showarchiving

display log archiving configuration and status

showaudit

display the current auditing system state

showautologout

display the session timeout time of the XSCF shell

showboards

display information on an eXtended System Board (XSB)

System Administration

3