deleteboard(8)

OPTIONS The following options are supported.

-c disconnect Detaches the XSB from the domain configuration and keeps it assigned. If the -coption is omitted, "-c disconnect" is used.

-c reset

Reserves disconnect of an XSB. If the -coption is omitted, "-c

 

disconnect" is used.

-c unassign

Disconnects the XSB completely from the domain configuration

 

and puts it in the system board pool. If the -coption is omitted,

 

"-c disconnect" is used.

-f

Forcibly detaches the specified XSB.

 

Note – If the -foption is used to forcibly add a system board to

 

a domain, all the added hardware resources may not work

 

normally. For this reason, use of the -foption is not

 

recommended in normal operation. If the -foption must be

 

specified, verify the status of every added system board and

 

device.

-h

Displays usage statement. When used with other options or

 

operands, an error occurs.

-n

Automatically answers 'n' (no) to all prompts.

-q

Suppresses all messages to stdout, including prompts.

-v

Displays a detailed message. If this option is specified with the

 

-qoption, the -voption is ignored.

-y

Automatically answers 'y' (yes) to all prompts.

OPERANDS The following operand is supported:

xsb

Specifies the XSB number to be disconnected. Multiple xsb

 

operands are permitted, separated by spaces. The following xsb

 

form is accepted:

 

 

x–y

 

 

where:

 

 

x

An integer from 00–15.

 

y

An integer from 0–3.

EXTENDED ■ When the command is executed, a prompt to confirm execution of the command

DESCRIPTION with the specified options is displayed. Enter "y" to execute the command or "n" to cancel the command.

32

XSCF Reference Manual • Last Revised January 2007