WATCHING PICTURES ON THE WIDE SCREEN

SWITCHING BETWEEN SCREEN SIZES

*You can also use the buttons on the display’s control panel to perform these steps.

1

2

Press .

The currently selected mode will appear.

Press to select a desired picture mode.

Each time you press , a different picture mode appears. The sequences used are as follows:

When you are in a Video or S-video input mode

When you are in a Comp.video input mode

When you are in an RGB input mode

*Depending on the type of signal, some aspects may not be selected.

Normal mode

Wide1 mode

Note

•Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in.

•A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same aspect ratio.

•Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making purposes or for a public audience may constitute a copyright infringement.

For films, try to select a mode having the same aspect ratio as the original picture; this enables the director’s original intentions to be preserved.

Reference

See P. E-22–E-23 for how to adjust the picture size and position.

E-16