OTHER ADJUSTMENTS (FEATURES MENU) (Continued)
• Specifying RGB Input Signal (Code Setting) | for RGB2 |
Normally, use this option in Auto mode.
•Displaying white over entire screen (White Screen)
You can use this option to display white over the entire screen to minimize phosphor 
or 
, one of the available choices appears in the following sequence:
On 
Off
Off: Does not display white.
On: Displays a white screen immediately.
Press 
to store.
•Setting Exhibition Mode (Exhibition Mode)
You can use this option to display the enhanced contrast, which is most suitable for the use by unspecified persons.
Each time you press 
or 
, one of the available choices appears in the following sequence:
On 
Off
On: Sets up Exhibition mode.
Off: Sets up normal mode.
Press 
to store.
*In Exhibition mode, the display returns to the original setting in about 5 minutes even if the adjustment is changed.
*The setup will be cancelled when removing the power plug from the receptacle.
• Displaying System Status (Information)
Displays system operation status.
Select “Information” and press 
.
The “Information” screen will appear.
Mode: | Input mode appears at the upper right corner of the screen. |
|
|
|
Freq. Scan Mode: Frequency scanning |
|
|
| |
Input Signal: | Video mode |
|
|
|
Input Sync.: | Signal type | Information screen (Video Mode) | ||
Freq.: | Synchronized signal frequency, polarity |
|
|
|
Preset No.: | RGB code number |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
Information screen (RGB Mode)
*
*Functions may not be available with some models and some device options.
*The adjustment range varies with the display signal. You can adjust the display quality to the value you want within the adjustable range.