STEP-BY-STEP EXECUTING OF PROGRAMS CREATED WITH THE ACCESSORY

PROGRAM CREATION SOFTWARE

1 Select PC CARD mode.

With the MODE button, select PC CARD mode.

ENGLISH

Example: PC CARD still picture display

2 Press the AUTO button.

The current viewing mode is displayed.

With the AUTO button, select MANUAL mode.

Pressing the button changes the mode as below.

AUTOMANUAL

Example: When MANUAL mode is selected

3 Display the next PC card screen.

Pressing the NEXT button on the remote controller changes the screen as below.

Fifth screen

Sixth screen

Seventh screen

Returning to the previous PC card screen

Pressing the RETURN button changes the screen to the previous one.

Seventh screen

Sixth screen

Fifth screen

Returning to the first PC card screen

Pressing the RESET button returns the display to the first screen.

Seventh screen

First screen

Points about usage

When the message NO CARD is displayed

•There is no PC card in the PC card slot. Check whether a PC card is inserted in the PC card slot, referring to page 16, "Using PC CARD".

When the message INVALID CARD is displayed

•The inserted PC card is the wrong type. Use a recommended PC card.

When the message DATA READING ERROR is displayed

•The data (still picture data or program) written to the PC card is unreadable. Take the PC card out of the PC card slot, referring to page 16, "Using PC CARD".

Be sure that the power switch of the Plasmavision is off before taking out the PC card.

Check the data written to the PC card with the accessory program creation software. For details, refer to the PC card's operation manual.

•In MANUAL mode, the color of the still picture can cause the picture to become jumbled when it is switched.

19