INPUT SOURCE ADJUSTMENTS (RGB MODE)
The Macintosh mode and the clamp pulse mode can be set for the input source, and the input signal can be confirmed.
EXAMPLE: SETTING MACINTOSH MODE
The Apple Macintosh has two dot clocks. If the display is partly cut or the video and the dot clock do not match, set the dot clock as follows:
1 Select SOURCE from the RGB MENU screen.
1) Press the MENU button.
2) With the ADJUST button, select SOURCE.
3) Set by pressing the SET button.
Example: When SOURCE is selected
2 Select the adjustment item.
With the SET button, select MAC
MODE.
Pressing the SET button moves the selection to the next item as below.
Example: When MAC MODE is selected
∗This operation can also be done using the buttons on the Display’s operation panel.
3 Select the appropriate mode for the dot clock.
Select with the ADJUST button.
Pressing the ADJUST button moves the selection to the next item as below.
MODE 1 
MODE 2
fHfV
Example: When MODE1 is selected
MODE 1····35 kHz | 66.67 Hz |
MODE 2····34.975 kHz 66.61 Hz
To adjust multiple items, repeat steps 2 and 3.
∗To complete adjustments
Press the MENU button to return to the RGB MENU.
Pressing the MENU button returns the display to the previous screen and closes the adjustment screen.
40