Fujitsu PDS4207E-H, PDS4207W-H manual 7

ACCESSORIES

Checking Accessories

Cable clamper ⋅	2	Power cord			Remote controller ⋅ 1	AA battery ⋅ 2
		PDS4207W-H ⋅		3
		PDS4207E-H ⋅		1
USER’S					Screw A (10 mm)
MANUAL
		A	B		Screw B (20 mm)
User’s Manual ⋅	1	Bracket ⋅	2 (2 types)		Screw ⋅ 2 (2 types)

ENGLISH

Cable clampers

•The accessory cable clampers are for fastening the connected signal cables and a power cable. When installing this display on a wall or ceiling, insert the cable clampers into the holes on the rear of the display.

Connecting to External Equipment

Cables for connecting external equipment must be

purchased separately.

Bundle connecting cables so that they lead downwards, as in the illustration.

Cable clamper

(Attach as in the illustration.)

Connectors
AUDIO INPUT	Pin jack
VIDEO INPUT	BNC
S-VIDEO INPUT	S terminal
COMPONENT VIDEO INPUT	BNC			RGB 1	RGB 2
					SYNC SW
RGB 1 INPUT	15-pin mD-sub			SYNC SW		Ω
					TTL/ANALOG (75		)
RGB 2 INPUT	BNC			TTL/ANALOG (75Ω )
					RGB 2 INPUT
RS-232C	9-pin D-sub
		AUDIO INPUT			RS-232C
∗ When connecting separately pur-				RGB 1 INPUT
chased BNC terminals, conversion
			VIDEO INPUT
connectors are required between the
				COMPONENT
pin jacks and the BNC terminals, so
			S-VIDEO	VIDEO INPUT
purchase these also.
			INPUT	(color difference
∗ Cables connecting the personal com-				input)
puter vary according to the type of
machine, so consult your product
dealer.				Display			Display
	To audio	To video	To S-video	(to analog			(to analog RGB
	output	output	output	RGB			output terminal)
	terminal	terminal	terminal	output			To RS-232C
				terminal)			terminal
			To component
			video output
			terminal		Connecting to PC
	Connecting to AV equipment						7