16-bit Proprietary F2MC-16L/16LX/16F Family Support Tools

■MB2000 : CAN FLASH EVALUATION BOARD

The Flash/CAN100 board was developed, in order to allow a fast software design start for customers wishing to use Fujitsu Flash and / or CAN MCUs in the 100-pin QFP package. Since Fujitsu in-circuit emulators require a target system that provides Vcc and Gnd, as well as an oscillation circuit, that enables customers to start development or evaluation work straight away without having to wait for their own target hardware.

Features

•100-pin socket adaptor for device or emulator connection

•On-board regulator allows for a 7-14V unstabilised external DC power supply

•5V and 3.7V internal power supply available for emulator

•Two high-speed CAN drivers

•RS232 interface

•All MCU pins brought out twice to external connectors

•Optional sub-clock

•RST, HST push-button

•8 test LEDs

•External reset via RS232

The Flash/CAN100 is supplied with the MB90F598 single-CAN and 128 KByte flash microcontroller. It is capable of supporting all of the following device types:

•MB90540 = MB90V540, MB90F543, MB90543

•MB90545 = MB90V540, MB90F549, MB90F548, MB90548

•MB90550A = MB90V550A, MB90F553A, MB90553A

•MB90580 = MB90V580, MB90F583B, MB90583B

•MB90590 = MB90V590, MB90F594A,MB90594, MB90F591, MB90591

•MB90595 = MB90V595, MB90F598, MB90598

The order code for the kit is FLASH-CAN2-100P-M06 and it is delivered with:

•The Flash/CAN100 board itself

•Two 50-pin socket connectors

•Power supply connector

•MB90F598 - 128kB Flash microcontrollers

•11 Jumpers

•1 socket adapter cover

•English documentation

172