GARDENA Hattrick HE 32 / HE 36 / HE 40 | | G |
| |
1. Technical data | HE 32 | HE 36 / MulchCut | HE 40 / MulchCut |
Motor | | electric engine with brake | |
Power consumption | 1300 W | 1400 W | | 1600 W |
Voltage | 230 V | 230 V | | 230 V |
Frequency | 50 Hz | 50 Hz | | 50 Hz |
Casing | plastic | plastic | | plastic |
Cutting width | 32 cm | 36 cm | | 40 cm |
Cutting height | 25 - 55 mm | 30 - 70 mm | | 30 - 80 mm |
Weight | 15.5 kg | 20.6 kg | | 27.5 kg |
Grassbox / grass catcher capacity | 32 l | 36 l | | 55 l |
Wheels | plain bearing | plain bearing | | ball bearing |
Working area related emission | | | | |
characteristic value L PA 1) | 74 dB (A) | 74 dB (A) | | 78 dB (A) |
Noise level L WA 2) | 85 dB (A) | 87 dB (A) / 89 dB (A) | 88 dB (A) / 90 dB (A) |
Vibrations a vhw 1) | < 2.5 ms - 2 | < 2.5 ms - 2 | | < 2.5 ms - 2 |
Measuring method 1) according to EN 836 | 2) according to 84/538/EC | | |
| | |
2. Operating instructions information | | |
Please read and follow these | For safety reasons chil- | Please keep these instructions |
operating instructions carefully. | Adren under the age of | in a safe place. |
Familiarise yourself with the unit’s | 16 or people not familiar with | | |
features, its proper use and the | these operating instructions | | |
using the screws (24) and wing nuts (23) supplied.
Note: The cable should always pass along the outside of the frame (ill. I) and should never be pinched or crimped.
4.To tighten the cable, put the clamp (2) from outside onto the lower part of the frame (ill. I, detail).
4.2Assembling the Hattrick HE 36 / HE 40
Parts list check
The packaging of the HE 36 / HE 40 should include the follow- ing parts:
.Electric Hattrick lawn mower
.Grass catcher (disassembled)
.Top of guide handle
.Fastening elements for guide handle
.Operating instructions with warranty card
.TORX ® -screwdriver for changing blades
Mounting the guide handle
(ill. A)
1.Swivel the folded bottom part of the guide handle (A1) into the working position and allow it to engage. Tighten well with the lower linkage locking handles (2).
2.Put the top of the guide handle (A2) onto the bottom part of the guide handle (A1) and secure using the fastening bits (screw and plastic wing nut).
3.Insert the connection cable into the cable guide on the wing screw (A 3).
Note: Only mount the screw with the cable guide on the cable guiding side of the handle.
Mounting the grass catcher (illustration sequences 1-5) The grass catcher is supplied loose (3 component parts).
G
The carrying handle (4) is below the protective cover (15).
1.Unfold the grass catcher (3) and insert the supporting frame
(5) through the opening of the grass catcher (3) so that the plastic base is on the bottom.
2.Then bend up the fastening flaps (6) by hand according to illustration 2 and use them to fix the grass catcher (3) to the supporting frame (5) according to illustration 3.
3.Fasten the carrying handle (4) by pressing the supporting frame (5) according to illustra- tion 4. The assembled grass catcher is shown in illustration 5.
Note: The supporting frame (5) is bent for fixing the carrying handle (4).
3. Product use
The GARDENA Hattrick HE 32 / HE 36 / HE 40 lawn mowers are designed for cutting and aerating lawns in and around the garden.
They are not designed for use in public facilities, parks, sporting grounds, on roads, in agriculture or forestry.
It is essential to observe the manufacturer’s operating instruc- tions to ensure the unit’s proper functioning. The operating instruc- tions also contain advice for service, maintenance and repair.
Attention! To prevent in- Ajury, the electric Hattrick lawn mower must not be used
for trimming bushes, hedges, shrubs, for cutting and pruning of climbers or grass on roofs or in balcony boxes. In addi- tion, the electric Hattrick lawn mower must not be used for chopping up branches, twigs or for levelling irregularities in the soil.
– cable lock / extension cable |
Hattrick HE 32 (see ill. L/M) |
Hattrick HE 36 / HE 40 (see ill. B) |
First plug the extension cable (7) |
from below into the base socket |
of the combination switch/plug |
(8). Loop the extension cable (7) |
and insert it into the cable lock |
(9) on the guide handle, allow the |
lead to the socket to sag a little. |
The cable lock prevents uninten- |
tional disconnection of the elec- |
tricity. |
mower on an even area of the lawn.
To start the mower depress the release button (10) on the combi- nation switch/plug (8) and simul- taneously pull the safety handle
(11)to the guide handle with the other hand. As soon as the motor starts you can release the release button (10).
If you release the safety handle (11) the motor switches off.
If the aerator cylinder or the cut- ting blades are blocked by a for- eign body or if the motor is over- loaded the motor switches off automatically within 20 to 35 sec- onds due to the built-in overload protection. In that case release the safety handle (11). Discon- nect the mains plug! Remove the foreign body if necessary.
Note: In long, wet grass, to start your electric Hattrick easily, slightly raise one side
4. Assembly
4.1Assembling the Hattrick HE 32
Parts list check
The packaging of the HE 32 should include the following parts:
.Electric Hattrick lawn mower HE 32
.Grassbox
.1 handlebar frame upper section (handle with switch)
.2 lower handlebar frame sections
.Fasteners for handlebar frame
.Operating instructions
.TORX ® -screwdriver for changing blades
Mounting the guide handle (ill. I)
1.Slide the lower sections of the frame into the recesses so that the flat sides point outwards.
2.Screw the frame in place using the wing screws (25) supplied.
3.Place the guide handle (1) into the hollow grooves and attach it to the lower handlebar frame
Lay out the surplus cable in loose |
loops at the side of the cutting |
lane and at the centre of the lane |
length. |
Note: Connect the extension cable to the mains so that it always feeds from the cut side.
5.2Starting the Hattrick lawn mower
Hattrick HE 32 (see ill. L)
Hattrick HE 36 / HE 40 (see ill. B/C)
A built-in motor brake still the cut- ting blades within three seconds.
Hattrick HE 32
If the aerator cylinder or the cutting blades are blocked by a foreign body or if the motor is overloaded release the safety handle (11) and disconnect the mains plug! Remove the for- eign body if necessary.
of the mower.
The switches installed Aby the manufacturer must not be removed or be bridged eg: by taping down the safety handle to the guide handle. This will prevent the mower switching off automatically, and could cause fatal injury.
Attention! Cutting blades con- tinue to run for three seconds after the motor is switched off.
