
Battery: Sounds when the battery reaches a specified low voltage.
Deep Water: Sounds when the water depth is deeper than the specified depth.
Drift: Sounds when depth variations at your present location exceed the specified depth.
Fish: Sounds when the device detects a suspended target.
• sets the alarm to sound when fish of all sizes are detected.
• sets the alarm to sound only when medium or large fish are detected.
• sets the alarm to sound only when large fish are detected.
Shallow Water: Sounds when the water depth is shallower than the specified depth.
Water Temperature: Sounds when the water temperature varies more than ± 2 °F (± 1.1 °C). Alarm settings are saved when the device is turned off.
NOTE: You must connect the device to a temperature- capable transducer to use this alarm.
System Settings
Select MENU > Setup > System.
Language: Sets the
System Information: Allows you to view software information.
System Unit Settings
Select MENU > Setup > Units.
Depth: Sets the depth units to feet (ft), meters (m), or fathoms (ftm).
Temperature: Sets the temperature units to Fahrenheit (°F) or Celsius (°C).
NOTE: You must have a
Appendix
Specifications
Specification | Model | Measurement | |
Temperature Range | echo 101 and 151 | From 5° to 131°F (from | |
|
| ||
| echo 201, 301, and | From 5° to 131°F (from | |
| 500 series | ||
Compass Safe | echo 101 and 151 | 10 in. (250 mm) | |
Distance |
|
| |
echo 201 and 301 | 10 in. (250 mm) | ||
| |||
|
|
| |
| echo 500 series | 15.75 in. (400 mm) | |
Power Source | echo 101 | From 10 to 20 V | |
Voltage Range |
|
| |
echo 201, 301, and | From 10 to 28 V | ||
| 500 series |
| |
Rated Current | All models | 1 A | |
Fuse | All models | AGC/3AG - 3.0 A | |
|
|
| |
Freshwater Depth* | echo 151 | 1600 ft (488 m) @ 77 kHz | |
|
|
| |
| echo 201, 201dv, | 1750 ft. (533 m) @ 77 kHz | |
| 301, and 301dv |
| |
| echo 500 and | 2300 ft. (701 m) @ 77 kHz | |
| 500dv series |
|
*Depth capacity is dependent on water salinity, bottom type, and other water conditions.
Cleaning the Outer Casing
NOTICE
Avoid chemical cleaners and solvents that can damage plastic components.
1Clean the outer casing of the device (not the screen) using a cloth dampened with a mild detergent solution.
2Wipe the device dry.
Cleaning the Screen
NOTICE
Cleaners containing ammonia will harm the
The device is coated with a special
1Apply an eyeglass lens cleaner specified as safe for anti- reflective coatings to the cloth.
2Gently wipe the screen with a soft, clean,
Software License Agreement
BY USING THE DEVICE, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY.
Garmin Ltd. and its subsidiaries (“Garmin”) grant you a limited license to use the software embedded in this device (the “Software”) in binary executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in and to the Software remain in Garmin and/or its third- party providers.
You acknowledge that the Software is the property of Garmin and/or its
Appendix | 3 |