Keys
D2™ Pilot Watch Quick Start Manual
WARNING
See the Important Safety and Product Information guide in the product box for product warnings and other important information.
Getting Started
When using your device the first time, you should complete these tasks to set up the device and get to know the basic features.
1Charge the device (Charging the Device).
2Register the device (Registering Your Device).
3Learn about the sensor data and modes (Viewing the Data Pages).
4Acquire satellites and record a track (Acquiring Satellite Signals and Recording a Track).
5Create a waypoint (Creating a Waypoint).
6Get the owner's manual (Getting the Owner's Manual).
Charging the Device
NOTICE
To prevent corrosion, thoroughly dry the contacts and the surrounding area before charging or connecting to a computer.
The device is powered by a
1Plug the USB end of the cable into the AC adapter or a computer USB port.
2Plug the AC adapter into a standard wall outlet.
3 Align the left side of the charging cradle with the groove on
À
the left side of the device.
4 Align the hinged side of the charger with the contacts on
Á
the back of the device.
When you connect the device to a power source, the device turns on.
5Charge the device completely.
À | Select to turn the backlight on and off. Hold to turn the |
| device on and off. |
Select to scroll through the data pages, options, and
Á
settings. Hold to navigate to an airport by airport code (Navigating to an Airport by Identifier).
Select to scroll through the data pages, options, and
Â
settings. Hold to navigate to the nearest airport (Navigating to the Nearest Airport).
Select to return to the previous screen. Hold to view the
Ã
status page.
Action key Select to open the menu for the current screen. Select
Ä
to choose an option and to acknowledge a message. Hold to mark a waypoint.
Viewing the Status Page
You can quickly switch to this page to view the time of day, battery life, and GPS status information from any other page.
Hold 
.
Viewing the Data Pages
Customizable data pages allow you to quickly access
From the time of day page, select 
or 
to cycle through the data pages.
Data Pages
The data pages available on your device vary based on the device mode. In low power mode, GPS is disabled, and the device does not record data. In tracking mode, GPS is enabled and sensor data is recorded to the track log, but you are not navigating to a destination. In navigation mode, you are navigating to a destination.
NOTE: Your body temperature affects the temperature and density altitude. To get the most accurate temperature reading, remove the device from your wrist and wait
March 2014 | Printed in Taiwan |