190-00498-07 Rev. A
Garmin G1000 Pilot’s Guide for Cessna Nav III
61
FLIGHT INSTRUMENTS
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS EIS AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE AFCS ADDITIONAL
FEATURES APPENDICES INDEX
When a bearing pointer is displayed, the associated information window is also displayed. The Bearing
InformationWindows (Figure 2-18) are displayed at the lower sides of the HSI and give the following
information:
•Bearingsource(NAV,GPS,ADF)
•Pointericon(BRG1=singleline,BRG2=double
line)
•Frequency(NAV,ADF)
•Station/waypointidentier(NAV,GPS)
•GPS-derived great circle distance to bearing
source
WhentheNAVradioistunedtoanILS frequencythebearingsourceandthebearingpointer isremoved
fromtheHSI.WhenNAV1orNAV2istheselectedbearingsource,thefrequencyisreplacedbythestation
identierwhenthe stationis withinrange. IfGPS isthe bearingsource,the activewaypointidentier is
displayedinsteadofafrequency.
Thebearingpointer isremoved fromtheHSI andNODATAis displayedinthe informationwindow if
theNAVradioisnotreceiving aVORstationor ifGPSisthebearing sourceandanactive waypointisnot
selected.
Selecting bearing display and changing sources:
1) Press the PFD Softkey.
2) Press a BRG Softkey to display the desired bearing pointer and information window with a NAV source.
3) Press the BRG Softkey again to change the bearing source to GPS.
4) To remove the bearing pointer and information window, press the BRG Softkey again.
DME INFORMATION WINDOW
The DMEInformationWindowisdisplayedabovetheBRG1InformationWindowonthe360˚HSIandin
aboxaboveandalong sidetheArcHSI. ItshowstheDME label,tuningmode(NAV1,NAV2,orHOLD),
frequency,anddistance.Whenasignalisinvalid,thedistanceisreplacedby –.––NMRefertotheAudio
PanelandCNSSectionforinformationontuningtheDME.
NOTE: DME installation is optional.
Displaying the DME Information Window:
1) Press the PFD Softkey.
2) Press the DME Softkey to display the DME Information Window.
3) To remove the DME Information Window, press the DME Softkey again.