Garmin garmin Device Configuration, Adding an Instrument Page, Removing an Instrument Page, Resolving a Combined Network, System Settings, Display Settings

1Select > EDIT CURRENT PAGE > CHANGE LAYOUT.

2Select the number of instrument screens to view at the same time.

3Select a category.

4Select an instrument.

5If necessary, select a data style.

6 Select DONE.

Adding an Instrument Page

You can create a custom page. You can add up to three instruments from instrument collections to display on a custom page.

1Select > ADD/REMOVE PAGE > ADD PAGE.

2Select ONE FUNCTION, TWO FUNCTION, or THREE FUNCTION.

3Select an instrument page collection.

4 Select a number.

5 If necessary, select an empty function.

6 Select or to scroll through the instrument pages. 7 Select an instrument page to add.

Removing an Instrument Page

1Select the instrument page to remove.

2Select > ADD/REMOVE PAGE > REMOVE PAGE.

3 Select YES.

Device Configuration

Resolving a Combined Network

When the device is turned on, it can detect when it has been synchronized with instruments on another network. This can happen if the device has previously been installed on another vessel and synchronized with instruments on the other vessel's network. If the settings are not restored to the factory default values (Restoring Profiles to their Default Settings), the device detects a conflict that must be resolved.

1Select > SETUP > COMBINED NETWORKS DETECTED.

2Select an option:

•To synchronize existing instruments on the network to the device, select NO.

•To synchronize the device to existing instruments on the network, select YES.

System Settings

Select > SETUP > SYSTEM.

UNITS: Sets the units of measure.

HEADING: Sets the reference and the variance used in calculating heading information.

BEEPER: Sets when audible sounds are used.

GPS POSITION: Sets the position format and the map datum. The map datum is dependent on the position format.

AUTO POWER: Enables the device to turn on automatically when the NMEA network turns on.

LANGUAGE: Sets the on-screen language.

OPERATING MODE: Displays a demonstration of device features.

TIME: Sets the time format, time zone, and daylight savings time for your location.

SYSTEM INFORMATION: Displays software information.

FACTORY DEFAULT: Resets the device to factory defaults.

Selecting the Heading Type

1Select > SETUP > SYSTEM > HEADING.

2 Select NORTH REFERENCE.

3 Select an option:

•To automatically set the magnetic declination for your GPS position, select MAGNETIC.

•To set true north as the heading reference, select TRUE.

•To set grid north as the heading reference (000°), select GRID.

Configuring the Beeper

1Select > SETUP > SYSTEM > BEEPER.

2 Select an option:

•To turn off the beeper, select OFF.

•To set the beeper to sound only when alarms are triggered, select ALARMS ONLY.

•To set the beeper to sound when the keys are pressed and alarms are triggered, select ON (KEYS AND ALARMS).

Configuring the Position Format

NOTE: Do not change the position format or the map datum unless you are using a map or chart that specifies a different position format.

1Select > SETUP > SYSTEM > GPS POSITION.

2 Select an option:

•To change the position format in which a reading appears, select POSITION FORMAT.

•To change the coordinate system on which the map is structured, select MAP DATUM.

Configuring Data Sources

Instruments that are connected to your device and provide data, such as wind sensors or speed sensors, can be configured through your device. Refer to your instruments' owner's manuals for more information.

1Select > SETUP > DATA SOURCES.

2 Select a data source and configure it.

3 Select your instrument.

4 Select a source and configure.

Display Settings

Select > SETUP > DISPLAY.

COLOR: Sets the screen color.

BACKLIGHT: Sets the backlight brightness.

NETWORK SHARING: Shares color and backlight settings with devices across the NMEA 2000 or NMEA 0183 network.

Viewing and Editing NMEA Settings

You can view information about NMEA or NMEA 2000 device and change device-specific options.

1Select .

2Select SETUP.

3Select NMEA 0183 or NMEA 2000 DEVICES.

4 If necessary, select an option:

•To view information about the device, such as the software version and the serial number, select DEVICE LIST.

•To change the label of a device, select LABEL DEVICES.

2 Device Configuration