2Select Measure Shot.
3 Walk to your ball.
The distance automatically resets when you move to the next hole.
Viewing Layup and Dogleg Distances
You can view a list of layup and dogleg distances for par 4 and 5 holes.
From the hole view (Hole View), select 
.
Layup and distance to reach the layup appear on the
ÀÁ
screen.
NOTE: Distances are removed from the list as you pass them.
Keeping Score
Before you can begin keeping score, you must start a round (Playing Golf).
1From the hole view (Hole View), hold 
.
2 Select Start Scoring.
3 Select 
or 
to set the score.
Your total score is updated.
À
4Select OK to return to the hole view.
Reviewing Scores
You can edit individual scores but not the total score.
1Hold 
.
2Select Scorecard.
3Select 
or 
to select the hole.
4 Select OK to edit.
Viewing Scorecards on a Computer
You can view all saved scorecards on your computer.
1Connect the device to a USB port on your computer using the charging cradle.
2The device appears as a removable drive in My Computer on Windows® computers, and as a mounted volume on Mac® computers.
3Open ScorecardViewer.html to view your scorecards.
Using the Odometer
You can use the odometer to record the time and distance traveled. The odometer automatically starts and stops when you start or end a round, and you can also start and stop it manually.
1Hold 
.
2Select Odometer to view or start the odometer.
3 Select an option:
•Select 
> Continue to keep using the odometer.
•Select 
> Turn Off to stop the odometer.
•Select 
> Reset to reset the time and distance.
Customizing Your Device
Settings
Hold 
, and select Setup.
Time: Sets the time to automatic or manual (Setting the Time Manually).
Format: Sets the time format to 12- or
Tones: Turns audible tones on or off.
Language: Sets the language.
Units: Sets to measure distance in yards or meters.
Setting the Time Manually
By default, the time is set automatically when the device acquires satellite signals.
1Hold 
.
2Select Setup > Time > Manual.
3Select 
or 
to set the hour and minute.
4 Select AM or PM.
Setting the Alarm
1 Hold .
2Select Alarm > Set.
3Select 
or 
to set the hour and minute.
4 Select AM or PM.
5 Verify the alarm is set to On.
Viewing Device Information
You can view the software version and unit ID.
1Hold 
.
2Select About.
Appendix
Device Care
NOTICE
Avoid extreme shock and harsh treatment, because it can degrade the life of the product.
Avoid pressing the keys under water.
Do not use a sharp object to clean the device.
Avoid chemical cleaners, solvents, and insect repellents that can damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to chlorine, salt water, sunscreen, cosmetics, alcohol, or other harsh chemicals. Prolonged exposure to these substances can damage the case.
Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause permanent damage.
Cleaning the Device
1Wipe the device using a cloth dampened with a mild detergent solution.
2Wipe it dry.
2