Press the black plastic hinge onto the keyboard cable.

Replacing Gateway M350 Components

11 Verify the black plastic hinge on the system board keyboard connector is in the raised position.

12 Insert the end of the keyboard cable between the black plastic hinge and the white connector.

Important The cable is correctly oriented if it is not twisted.

13

14 Rotate the keyboard toward the LCD panel until the keyboard is almost face-up.

15 Insert the four tabs located on the front edge of the keyboard into the corresponding slots under the palm rest.

Tabs

16 Gently press the keyboard down until it is flat all the way across. The keyboard should easily fall into place. Be careful not to damage the LCD panel.

26

www.gateway.com