6
7
Install the Window Locking Bracket and the Foam Top Window Gasket
| Attach the window locking bracket with a |
| Cut the foam top window gasket to the |
A | B | ||
| type C screw. |
| window width. |
|
| ||
|
|
| Stuff the foam between the glass and the |
|
| C | |
|
|
| window to prevent air and insects from getting |
|
|
| |
|
|
| into the room. |
Install the Air Conditioner in the Case
| Slide the air conditioner into the case. |
| Attach the front grille to the case by inserting the |
A | C | ||
| Reinstall the 2 screws removed earlier on |
| tabs on the grille into the slots on the front of the |
|
| ||
| each side of the case. |
| case. Push the grille in until it snaps into place. |
BBefore installing the front grille, pull out the vent control lever located above the unit control knobs, as shown.
Guide the lever carefully through the grille as you push it in.
| Lift the inlet grille and secure the front frame |
D | |
| with a type A screw through the front grille. |
| |
| Lower the inlet grille back into place. |
13
Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips
Customer Service