GE AG_07 7 Important Safety Information, Read All Instructions Before Using, Safety Precautions

Models: 000 BTU models AG_07 7 AG_10 10 AG_08 8 AG_12 12

1 20
Download 20 pages 6.25 Kb
Page 3
Image 3
IMPORTANT SAFETY INFORMATION.

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

READ ALL INSTRUCTIONS BEFORE USING.WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

 SAFETY PRECAUTIONS SAFETY PRECAUTIONS

Safety Instructions

Use this appliance only for its intended purpose as described in this Owner’s Manual.

This air conditioner must be properly installed in accordance with the Installation Instructions before it is used.

Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

Repair or replace immediately all electric service cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

Turn the mode control to OFF and unplug your air conditioner before making any repairs or cleaning.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

For your safety…do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

Operating Instructions Installation

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The air conditioner should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

See the Installation Instructions, Electrical Requirements section for specific electrical connection requirements.

Instructions Troubleshooting Tips

Customer Service

3

Page 3
Image 3
GE AG_07  7 Important Safety Information, Read All Instructions Before Using, Safety Precautions, Safety Instructions