0150-0198H 52 DVMRe Triplex eZ
In order to use Dynamic DNS with GnuDIP, the user has to configure following in the menus:
• Name Service must be set to GnuDIP (Ethernet Setting Menu).
• Primary Name Server must be set to the IP address of the GnuDIP server (Ethernet
Setting Menu).
• Hostname must be set to the required hostname format e.g. ge04.companyname.net.
For registration purposes, the string until the first dot is used as hostname (here: ge04),
the remainder is used as domain (here: companyname.net). The hostname is set via
the Ethernet Setting menu and is case sensitive.
• DDNS update interval must be set to a reasonable value (e.g. 2 minutes).
• The password for the DDNS server has to be set in the Passwords->DDNS password
menu. The password is 4 digits long (The Enter button can be used for the number 0).
When everything is configured correctly, the DVMRe will send periodically a Dynamic DNS
update message over TCP port 3495 to the Dynamic DNS server telling the server its
hostname. The DVMRe does not include its IP address in the message. Instead the Dynamic
DNS server extracts the IP address of the DVMRe via the Ethernet source IP address. This
guarantees that the correct IP address is used even when the DVMRe is behind a NAT router.
3.17 Front Panel Lock
Use this feature to lock the front panel keypad. While locked,
the only operational key on the front panel is the Menu button.
To unlock the front panel, enter the Installer password and return
to this menu.
Highlight the item you wish to select.
Save changes and exit the menu: Press the Enter button.
Exit the menu without making changes: Press the Menu button.
3.18 Factory Settings
Return To Factory Defaults
Factory Default Password
10 and 16-Channel 8 1 1 1
4-Channel 4 1 1 1
From the Factory Setting menu, press the Enter button. A
password box will appear. Enter the Factory Default password.
Select OK, then press the Enter button.
The unit will reboot, returning all settings (except the time, date,
email addresses, and email IP address) to the factory defaults.
Due to the large size of the hard disk, the reboot may take several
minutes.
Change Language
Language Password
10 and 16-Channel 5 4 1 5
4-Channel 1 4 1 4
From the Factory Setting menu, press the Enter button. A
password box will appear. Enter the Language password. Select
OK, then press the Enter button.
A menu will appear displaying the available language selections.
Rotate the Jog to select the desired language.
Save changes and exit the menu: Press the Enter button.
Exit the menu without making changes: Press the Menu button.
Unlock Keyboard
Lock Keyboard
NOTE