GE GSC3500 owner manual Operation of models with cycle dial, Rinse Only, Plate Warmer, Hot Start

Light Wash

Safety Instructions

Operating Instructions

Troubleshooting Tips

Consumer Support

Operation of models with cycle dial

Rinse Only

For rinsing partial loads that will be washed later. Do not use detergent.

1 Make sure HEATED DRY is not selected.	3 Slowly turn the Dial to RINSE ONLY.
2 Be sure the door is unlatched.	4 Latch the door to start the cycle.

Plate Warmer

For warming clean dishes and serving plates. This cycle will take approximately 39 minutes.

1 Load clean dishware to be warmed.	4 Slowly turn the Dial to PLATE WARMER.
2 Select HEATED DRY ON.	5 Latch the door to start the cycle.
3 Be sure the door is unlatched.

Hot Start

Preheats wash water prior to the NORMAL or POTS & PANS cycle.

1	Be sure the door is unlatched.	3	Slowly turn the Dial to HOT START.
	Press the NORMAL pad or the		Latch the door to start the cycle.
2		4
	POTS & PANS pad.

For quickly washing loads of everyday dishes with light to medium soils that have not dried on.

1 Be sure the door is unlatched.	3 Press the NORMAL pad.
2 Slowly turn the Dial to LIGHT WASH.	4 Latch the door to start the cycle.

Start

For NORMAL or POTS & PANS cycles selected by push button.

1 Be sure the door is unlatched.	3 Slowly turn the Dial to START.
2 Press the NORMAL pad or the	4 Latch the door to start the cycle.
POTS & PANS pad.

There is a time delay between start-up and water fill so you will not hear any wash action right away.

6