Simon Security System 9
Alarm Sirens and Lamp Modules
Exterior and interior sirens make 3 different alarm sounds on the premises, each indi-
cating a different type of alarm. Sirens are programmed by the installer to time-out and
stop sounding after a specified time.
Use the following table to understand the siren sounds used by the security system.
Temporal 3 refers to a continuous pattern of 3 siren pulses then off for 1.5 seconds, 3
siren pulses then off for 1.5 seconds.
Panel Indicator Lights
Use the following table to understand the panel indicator lights.
Numeric Pager
You may program your security system to send a numeric message indicating system
activities to your pager. The system will send the message twice. See “Programming
Instructions”.
Use the following table to determine what the numeric message is reporting.
Alarm Siren and X10 Light Information
Fire Intrusion Emergency
X10 Lights Steady Flashing Steady
X10 Siren Steady Steady Alarm beeps
Interior & Panel Siren Temporal 3 Steady Fast on/off
Exterior Siren Temporal 3 Steady
Panel Indicator Lights
Button When the Button Light is
On
When the Button
Flashes
Arm Doors & Windows Doors/Windows armed Doors/Windows armed
& No Entry Delay on
Arm Motion Sensors Motion Sensors armed Motion Sensors armed
& Latchkey on
Disarm System disarmed System subdisarmed
System Status System trouble or Open Sen-
sor
System in alarm
Chime Doors Door will cause chime _________________
Chime Special Motion Motion will cause chime _________________
Time Lights Time activated lights on _________________
Sensor Lights Sensor activated lights on _________________
Numeric Pager Reporting
Reports Numeric
Message Reports Numeric
Message
Phone Test -101 -101 Fail to Open -112 -112