Simon Security System
22
4. Press Option #. Panel announces, Option 1, press again for next option or done to
select.
5. Press 55. Panel announces, Option 55, press again for next option or done to select
6. Use the numbered keys to ente r the desired volume setting (01-10).
7. Press DONE.
Delete sets the volume of status sounds to the default setting (7).
1. Open panel cover. Panel announces, Use numbered keys to enter ID.
2. Enter Access Code using the numbered keys. Panel announces, Please select from
Start Men u.
3. Press Delete from the Start menu. Panel announces, Select from main menu
4. Press Option #. Panel announces, Option 1, press again for next option or done to
select.
5. Press 55.
6. Press DONE.
Option 81: Heating Set Point
Note
The panel needs to be
armed to Doors & Windows
and Motion Sensors for
Options 81 and 82 to work. If
there are no Motion Sensors
in the system, the Motion
Sensors button must still be
pressed. When the system
is disarmed both options
default to off.
When this option is on you can set a temperature that will automatically turn the furnace
on if the temperature falls below the set temperature. The commands are set through the
control panel, to the RF Electronic Thermostat, when the system is armed to Doors &
Windows and Motion Sensors.
Note
RF Thermostat must be in
Heat Mode or Auto Mode for
the option to work properly.
Add allows you to set the temperature from 51°F - 91°F.
1. Open panel cover. Panel announces, Use numbered keys to enter ID.
2. Enter Master Code using the numbered keys. Panel announces, Please select from
Start Men u.
3. Press Add from the Start menu. Panel announces, Select from main menu.
4. Press Option #. Panel announces, Option 1, press again for next option or done to
select.
5. Press 81. Panel announces, Option 81, press again for next option or use numbered
keys to enter option.
Note
Heating and Cooling Set
Points need to be pro-
grammed with a difference
of at least 2 degrees for
these Options 81 and 82 to
work properly.
6. Enter the temperature (51 - 91) with the numbered keys.
7. Panel announces the temperature that has been selected.
Delete disables the Heating Set Point feature.
1. Open panel cover. Panel announces, Use numbered keys to enter ID.
2. Enter Access Code using the numbered keys. Panel announces, Please select from
Start Men u.
3. Press Delete from the Start menu. Panel announces, Select from main menu
4. Press Option #. Panel announces, Option 1, press again for next option or done to
select.
5. Press 81. Panel announces, Option 81, press again for next option or done to delete.
6. Press DONE. Panel announces, Option 81 deleted.
Option 82: Cooling Set Point
When this option is on you can set a temperature that will automatically turn the air con-
ditioner on if the temperature rises above the set temperature. The commands are set
through the control panel, to the RF Electronic Thermostat, when the system is armed to
Doors & Windows and Motion Sensors.
Note
RF Thermostat must be in
Cool Mode or Auto Mode for
the option to work properly.
Add allows you to set the temperature from 51°F - 91°F.
1. Open panel cover. Panel announces, Use numbered keys to enter ID.
2. Enter Master Code using the numbered keys. Panel announces, Please select from
Start Men u.