Cut-out dimensions:
Height: 341/2″(876 mm) minimum
Width: 233/4″(603 mm) minimum
Depth: 24″(610 mm)
Installation
dimensions
The outdoor/indoor refrigerator can be
a free-standing model or can be built in
using the cut-out dimensions below.
When building in the outdoor/indoor
refrigerator, be sure to allow for a full
door swing so you have full access to the
pull-out full extension drawers.
See the Installation Instructions (Pub. No.
31-51542) for complete directions.
36″
(914 mm)
(with top
canopy)
233/4″
(603 mm)
233/4″
(603 mm)
Product dimensions:
Height with
canopy: 36″(914 mm)
Height without
canopy: 341/2″(876 mm)
Width: 233/4″(603 mm)
Depth: 233/4″(603 mm)
NOTE:
Handle and
handle standoff
depth is 23/4″
Top canopy
removal
The top canopy may be removed when
installing under a countertop.
The door MUST BE closed when
removing or replacing the top canopy.
To avoid damage, the top canopy must
clear the left hinge center locking plate
and right hinge.
•Remove the 3 screws from the back of
the top canopy (A).
•Using heavy-duty work gloves, lift up
on the top canopy back (B) and slide
it forward until it unlatches from the
unit (C).
•Lift the top canopy up and off of
the unit.
NOTE: Keep the top canopy and screws
for future free-standing installations.
NOTE: When installing the unit in a
free-standing configuration, the top
canopy must be left in place.
CAUTION: Under side edges
of the stainless steel canopy top may be
sharp. Wear heavy-duty work gloves when
moving the top.
14
(A)
(B)
(C)
Built-In Dimensions
Outdoor/Indoor Refrigerator
NOTE: Door MUST BE
closed before removing or
replacing the top canopy.