Genie 3452535556 manual Table Of Contents, Operator Features, Safety Features, Lighted Wall Button

TABLE OF CONTENTS

	SECTION		PAGE
	PRE-INSTALLATION CHECKS		. . 2-3
	OPERATOR FEATURES		. . . 4
4	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SAFETY FEATURES		. . . 4
	TOOLS RECOMMENDED		. . . 5
	. . . . . . . . . . . . . . . . . . . . . . . . . . . .PARTS IDENTIFICATION.		. 5-7
	SAFETY INFORMATION		. . . 7
	OPERATOR		. . . . . .
	1	ASSEMBLY	8-10
	2	INSTALLATION	11-14
	ELECTRICAL INSTALLATION		15-18
	3	SAFE-T-BEAM®SYSTEM INSTALLATION	15-16
	4	WALL CONTROL INSTALLATION	. . 17
	5	CONNECT OPERATOR TO POWER	. . 18
	ADJUSTMENTS		19-21
	6	LIMIT SWITCHES & FORCE ADJUSTMENT	. . 19.
		CONTACT REVERSE	. . 20
	7	PROGRAMMING REMOTE CONTROLS	20-21
	8	BATTERY/VISOR CLIP INSTALLATION	. . 21
	9	LIGHT BULB AND LENS INSTALLATION	. . 21
	SAFETY INSTRUCTIONS		. . 22
	MAINTENANCE & TROUBLESHOOTING		22-24
		SAFE-T-BEAM®	. . 22
		OPERATOR/RADIO	. . 23
		WIRING DIAGRAM	. . 24
	ACCESSORIES		. A-B
	WARRANTY		. . . C

*Operator MUST be installed with the included Wall Control.

**Safe-T-Beam®Safety Reverse System MUST Be Installed To Close door.

OPERATOR FEATURES

INTELLICODE® Rolling Code Security System.

An electronic rolling code system that enhances the security of the door operator by continuously changing the access code each time the remote control is used. The door operator responds to each new code only once. An access code copied from a working system and tried again will not control the door operator.

INTELLICODE® 1, 2 or 3-Button Remote Control (included with some models).

Operates 1, 2 or 3 garage doors from car.

Lighted Wall Button*.

Operates door operator from inside garage.

Lighted Wall Console* (included with some models).

Security vacation lock switch disables all controls. LED Indicator shows whether system is locked or unlocked. Makes console easy to find in dark. Controls door operator from inside garage. Independent light control allows convenient manual control of the automatic lighting system.

NOTE: Your garage door operator may not come with all above items included as standard equipment.

SAFETY FEATURES

Safe-T-Beam®(STB) Non-Contact Reversing System**.

Puts an invisible beam across the door opening. The door stops and reverses to the full open position if anything passes through the beam. Red and green LED indicators provide a self diagnostic code if an operational problem exits.

Safe-T-Reverse®Contact Reversing System.

Automatically stops and reverses a closing door within 2 seconds of contact with an object.

Safe-T-Stop®Timed Reversed System.

Automatically opens a closing door if it fails to close completely within 30 seconds.

Force Guard® Control.

Features adjustable open and close force settings. For maximum safety, these must be set to the minimum force required to fully open and close the door.

Relay Monitoring System.

Automatically stops and reverses a closing door if the closing relay malfunctions.

Watch Dog® Monitoring System.

Automatically stops and reverses a closing door if the Safe-T-Beam System** has an operational problem.

Automatic Lighting System.

One bulb lighting supplies up to 100 Watts of light for safer evening exits and entries. Turns on when door is activated and automatically turns off 5 minutes later.

Manual Emergency Release.

Manually releases door from door operator. Use during a power failure or other emergency to allow manual opening and closing of door.