Graco 3A0427B important safety instructions

3A0427B
EN
Instructions-Parts
Low Flow Fluid
Regulator
Pneumatic controlled fluid regulator provides accurate, positive pressure control of
finishing coatings in low flow applications. For professional use only.
100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure
300 psi (2.1 MPa, 21 bar) Maximum Fluid Inlet Pressure
90 psi (0.63 MPa, 6.3 bar) Maximum Regulated
Fluid Pressure (High Pressure Port, All Mod els)
Part No. 24C375, Series A
1:1 Ratio, 90 psi (0.63 MPa, 6.3 bar) Maximum
Regulated Fluid Pressure (Low Pressure Port)
Part No. 24E471, Series A
1:2 Ratio, 50 psi (0.35 MPa, 3.5 bar) Maximum
Regulated Fluid Pressure (Low Pressure Port)
Part No. 24E472, Series A
1:3 Ratio, 30 psi (0.21 MPa, 2.1 bar) Maximum
Regulated Fluid Pressure (Low Pressure Port)
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
TI15288a