309445Rev. E
To find your local Graco authorized service
center:
Call us at 1–800–690–2894
Visit our website at www.graco.com
INSTRUCTIONS–PARTS LIST
Important Safety Instructions
Read all warnings and instructions
in this manual. Save these
instructions.
Pressure Roller with 20” Heavy Duty Extension, EvenFlowt RollerFrame and Contractort Inline Valve

– For the rolled application of architectural paints and

coatings –

Model 245397, Series C
20 in. (50 cm) Heavy-Duty Extension
9 in. (23 cm) EvenFlow Roller Frame
1/2 in. (13 mm) Nap Roller Cover
Contractor Inline Valve
3600 psi (24.8 MPa, 248 bar) Maximum Fluid Inlet Pressure *
The best operating pressure is the lowest pressure that provides
an even paint supply to the roller and typically does not exceed
300 psi (2.1 MPa, 21 bar).
*

CAUTION

Never leave water in the pump, inline valve, or roller frame.
Doing so could cause corrosion and damage from freezing.
For storage, flush the system with Graco Pump Armor or
mineral spirits/paint thinner.
GRACO INC.ąP.O. BOX 1441ąMINNEAPOLIS, MNą55440-1441
COPYRIGHT 2001, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001