Grandstream Networks BT200 USING THE BT200 IP PHONE

• Headset with auto switch when in use

• 10/100 Mbps Full/Half Duplex Ethernet Switch with LAN and PC port,

• Auto detect Ethernet polarity - use either straight through or twist cable

• Message Waiting Indicator – RED LED

TABLE 2: TECHNICAL HARDWARE SPECIFICATIONS

LAN interface 2 x RJ45 10/100Mbps Ethernet Ports

Headset Jack 2.5mm Headset port

LED 1 LED in RED color

Phone Case 25-button keypad

12-digit caller ID LCD

Universal Switching

Power Adaptor

Input: 100-240VAC 50-60 Hz

Output: +5VDC, 1200mA, UL certified

Dimension 18cm (W) x 22cm (D) x 6.5cm (H)

Weight 0.9kg (2lbs)

Temperature 40 - 130ºF | 5 – 45ºC

Humidity 10% - 90%

(non-condensing)

Compliance FCC / CE / C-Tick

USING THE BT–200 IP PHONE

BT–200 has a numeric backlit LCD measuring 64mm x 24mm which displays icons to illustrate the

mode(s) of the phone. The LCD turns on with an incoming call. If voicemail is configured, there is also a

RED LED message indicator.

FIGURE 2: BT–200 LCD ILLUSTRATION

Grandstream Networks, Inc. BT-200 User Manual Page 9 of 35

Firmware 1.1.1.14 Last Updated: 12/2006