Grandstream Networks, Inc. GXW-400x User Manual Page 13 of 31
Firmware 1.0.0.17 Last Updated: 12/2006

BASIC OPERATIONS

UNDERSTANDING GXW VOICE PROMPTS

GXW–400x has a stored voice prompt menu for quick browsing and simple configuration. Enter *** on

the standard analog phone connected to any FXS port to use the voice prompt menu.

TABLE 5: DEFINITIONS OF THE GXW VOICE PROMPTS

Menu Voice Prompt User’s Options

Main Menu “Enter a Menu Option” Enter “*” for the next menu option
Enter “#” to return to the main menu
Enter 01 – 06, 47, 86 or 99 Menu option
01 “DHCP Mode”, or
“Static IP Mode”
Enter ‘9’ to toggle the selection
“Static IP Mode”: configure all the IP address information through
menu options 02 to 05.
“Dynamic IP Mode”: IP address information is retrieved from the
DHCP server automatically at reboot.
02 “IP Address “ + IP address The current WAN IP address is announced
Enter 12-digit new IP address if in Static IP Mode.
03 “Subnet “ + IP address Same as Menu option 02
04 “Gateway “ + IP address Same as Menu option 02
05 “DNS Server “ + IP address Same as Menu option 02
07 Preferred Vocoder Enter “9” to go to the next selection in the list:
• PCM U / PCM A
• G-723
• G-729
• iLBC
• G-726-32
• G728
• G729E
10 “MAC Address” Announces the Mac address of the unit.
12 WAN Port Web Access Enter “9” to toggle between enable and disable
13 Firmware Server IP Address Announces current Firmware Server IP address. Enter 12 digit new
IP address.
14 Configuration Server IP
Address
Announces current Config Server Path IP address. Enter 12 digit
new IP address.
15 Upgrade Protocol Upgrade protocol for firmware and configuration update. Enter “9”
to toggle between TFTP and HTTP
16 Firmware Version Firmware version information.
17 Firmware Upgrade Firmware upgrade mode. Enter “9” to rotate among the following
three options:
1. always check
2. check when pre/suffix changes
3. never upgrade
47 “Direct IP Calling” User will be prompted with a dial tone to dial a 12-digit IP address
to make a direct IP call.
(For details, see Make a Direct IP Call)
99 “RESET” Enter “9” to reboot the device; or
Enter MAC address to restore factory default setting.
“Invalid Entry” Automatically returns to Main Menu