
Horizontal Table Movement
1.
Figure
38
Workstops
Table Workstop
1.
Figure 39
The belt speed on the Model G0679 is 3600
FPM, or over 40 MPH. A workpiece ejected
at this speed could cause serious personal
injury and property damage. Always use the
workstops and be sure they are in the cor-
rect position and secured before using the
machine.
Figure 39. Table workstop.
2.
Note: To lock the horizontal table move-
ment, turn the table travel locks 1⁄3 of a turn
clockwise. To release the horizontal table
movement, turn the table travel locks 1⁄3 of a
turn counterclockwise. Be careful not to over-
tighten the lock handles. Doing so may cause
damage to the machine.
Figure 38. Horizontal table movement.