-16- Model g0703 (Mfg. since 8/09)
figure 11. installing the hand rail.
10. With the help of an assistant, raise the dust
collector to the upright position, and install
the handle (figure 11) with (4) 5⁄16"-18 x 3⁄4"
hex bolts and 5⁄16" washers.
figure 12. Filter-element crank installation.
11. Engage the filter-element crank (figure 12)
with the shaft, and secure it in place with one
5⁄16"-18 x 3⁄4" hex bolt and one flat washer.
12. Attach the casters to the bottom of the drum
using (4) 3⁄8"-16 hex nuts, (4) 3⁄8" flat washers,
and (4) 3⁄8" lock washers (figure 13).
figure 13. dust collection drum casters installed.
figure 14. lid latch installation.
13. Attach the lid latches to the side of the drum
extender using six #10-24 x 3⁄8" phillips head
screws and #10-24 nuts as illustrated in
figure 14.
Note: To avoid bag snags, face the screw
heads located inside of the drum with the
shanks facing outward, as illustrated in Figure
14.