Getting started
1Put batteries in the remote control
Open the battery cover of the remote control and put two AAA size batteries so that the ‘+’ and
04
8
tuv wxyz
_ | + |
| |
Battery AAA | AAA Battery |
+ | _ |
2Plug in and switch on
Insert the mains lead into the ‘12V DC IN’ on the back of the Digital TV Recorder and connect the other end into a mains socket. The red standby light on the front of the Digital TV Recorder will come on.
Switch your TV On and select HDMI.
Press the standby button on your remote control.
3The first time install screen
The first time installation screen will appear on screen.
If the signal strength is above 50% press the [OK] button on your remote control to continue the setup.
Follow the instructions on screen to complete the installation.
First Time Installation
Step 1 of 5 | Step 2 of 5 | Step 3 of 5 | Step 4 of 5 | Step 5 of 5 |
!WARNING
Make sure that your freesat+ receiver has been connected correctly
before continuing the installation
If signal strength is less than 50% please check the dish alignment and connections
Press OK to search for the Network and Transport ID
| 25% | 50% | 75% | 100% |
|
Signal Strength |
|
|
|
| |
Network ID | - - - - | Transport ID | - - - | - |
|
R |
|
| OK | Search | EXIT Exit Menu |
8