TV FUNCTIONS
Example: To shift to program No. 99, first press 9. In that case a message "9" appears on the right corner of the screen. Quickly press 9 again, the set changes to the program no. 99
9 | 0 | 99 |
5.S/M/D button: For stereo broadcasting, you can change the volume as Mono, Stereo or DUAL A, DUAL B.
6.AV: To select video source press the AV button on the R/C. Following modes can be selected in source menu “TV, SCART1, SCART2, SIDE AV,
2. MUTE
To mute the sound, press MUTE button on the RC. Pressing this button again will restore the sound at its former level.
3.16:9 button: This is used to change the picture size. Auto, 16:9, 14:9, Cinema, Zoom and 4:3 picture formats are available.
Manual Zoom: Press the (
) Zoom button on the RC while in cinema mode to activate Manual Zoom. Pressing V+/V- buttons will adjust vertical zoom.
4.PP: Pressing this button will load the audio and picture values in the memory. Pressing PP button for about 2 seconds will memorize current TV audio and pictures values as "User Settings" an
*Source Menu can’t be displayed while in PC, DVI modes, so to return back to TV in DVI, PC modes, press (TV) button.
While menu is on the screen, you can’t switch the set to AV mode.
7. Automatic shutting down: The TV set will automatically change to stand by mode 5 minutes after the broadcasting is over.
Note: If you leave the TV in AV mode, it will not shift to Standby mode after 5 minutes even there is no broadcasting
8.OK Button: This provides shift from the main menu to submenu vice versa
9. Info Button (‹ ): Press this button to see the information on the current channel
17