ENGLISH

34

usB reCorDinG --------------------------------------------------------------------------------------------------------------
Connecting external data media
notes:
7
Before connecting the data medium, switch
the television to standby with
»8«
. Connect
the device and then switch the television on
again.
7 Before removing the external data medium,
the television must be switched to standby,
so that no data loss occurs.
7
Your television features two USB sockets,
»usB HDD« and »usB«.
»usB HDD« is used to connect data media,
which require an additional power supply
– for example, external hard disks.
1 Connect the »usB HDD« socket of the
television and the corresponding socket of
the data medium (external hard disk) using
a USB cable;
or
Insert the USB plug of the USB memory stick
into the »usB« socket of the television.
2 Confirm the display » « with »«
(green).
– The file browser appears.
notes:
7
The »usB« socket of the television supplies
a maximum power of 500 mA in accord-
ance with USB specifications. External hard
disks which require more power may there-
fore only be connected to the »usB HDD«
of the television.
7
If you use a network cable for external hard
disks which have been connected to the
»usB HDD« socket of the television, this
network cable must also be disconnected
from the power supply when the television is
switched off.
7
External data media may not be disconnect-
ed from the television while files on the data
medium are being accessed.
settings for usB recording

selecting the menu

1 Open the menu with »menu«.
2 Select the line »USB RECORDING« with
»
v
« or »
Λ
« and press »oK« to confirm.
– The »USB RECORDING« menu appears.
PRnP
Partition
Disk
Auto Preview
USB
On
Check Disk
Exit
Back
USB RECORDING
Manage data medium
Capacity Used %3
Used (MB) 1249
Total (MB) 38145
Remaining SD recording time 1,008 min
Remaining HD recording time 288 min
20.09.2010
15:46